Print

Print


Hello Valerie and everyone,
during my thesis I found a lot of glyphes that seems to be created "ah hoc"
to complete SW, not only for pauses but for mouvement, configurations... As
you know, we have developped a new software for writing SW with Fabrizio
Borgia. In our software, we have found a method to use those created
symbols without making the software go crazy because of using of symbols
for an aim different than the one the have been created for. We wrote an
article on this, but it is in french and it's still in press (I hate the
longs times the editors takes to press books!). It is quite complicate to
explain everything, because in my thesis it takes 150 pages (over 400) just
for this. The main thing is that we reorganize SW, searching
for symboles that might be there but are not. Then we creates thoses
symboles (we just theoreticaly creathe them, as Valewrie knows so well,
it's a very long job to do). But if someone need a symbol that is not in Sw
official set, and is not in our complement, we have created a system to
draw symbols directly on our editor, but letting the software know that
they are created one, so he can't confuse them with the original ones.
I'll send you the article ASAP (maybe it will be published on may) and I
think that our software will be ready and open to everyone in a few months,
so in the next future you can try it




2012/2/16 Valerie Sutton <[log in to unmask]>

> SignWriting List
> February 16, 2012
>
> Hi Charles -
> Thank you for this message. Yes, of course constructing symbols is not a
> perfect solution, as you mention in your message. I agree with you. I like
> the idea of freezing a constructed symbol, so it can be rotated and
> remembered and later classified in some way so it can be found and used
> again. I should think that could be programmed within software. And that
> would provide information for adding new symbols to any new symbol set in
> the future… shall we say the ISWA 2020? (big smile ;-)
>
> Thanks for the good comment, Charles!
>
> Val ;-)
>
> ----------
>
>
> On Feb 16, 2012, at 6:19 AM, Charles Butler wrote:
>
> Valerie, et al,
>
> The only problem I have with "constructing" symbols is that it defeats the
> purpose of actually having an ordered system. If one is hunting for a
> particular sign, such as a newly constructed Ethiopian handshape that is
> built off, say, an R, in group 2, how can that be ordered using a
> dictionary program. It will fall out of the dictionary because it has no
> separate grouping. One cannot isolate those signs that use it, and it
> alone, they will come up as R variants.
>
> Ditto, this construction of pauses out of lines that are normally used for
> arms. If they are arms, they aren't pauses, they are arms, and if you look
> for an arm at an angle, these will come up. Either they are arms, and
> ordered in the system lookup as arms, not pieces that fall apart into a
> long line, which may or may not be an upper arm, or a short length, which
> may or may not be the lower arm, or a given finger in all of its bendings,
> which could be any of the four fingers, and I suppose, the thumb.
>
> What I truly think, in the long term, is the possibility of constructing a
> handshape and freezing it as a group so that it can be rotated as a whole,
> with a naming convention of where it fits in the ISWA, IMWA or whatever the
> current name is. I know how long it takes you, Valerie, and others to
> construct a handshape with its 96 rotations, so at some point, there must
> be a mathematical solution that can relieve one of that labor intensive
> work.
>
> Charles Butler
> [log in to unmask]
> 240-764-5748
> Clear writing moves business forward.
>   *From:* Valerie Sutton <[log in to unmask]>
> *To:* [log in to unmask]
> *Sent:* Wednesday, February 15, 2012 12:15 PM
> *Subject:* Re: Symbols quotation marks and long pause
>
>  SignWriting List
> February 15, 2012
>
> I posted this message to the List, but I am not sure it made it to the
> List - Please excuse if this is a double posting -
>
> Keep asking questions!
>
> Val ;-)
>
> -----------
>
>  On Feb 15, 2012, at 8:39 AM, Valerie Sutton wrote:
>
>  SignWriting List
> February 15, 2012
>
> Hello Madson and everyone -
>
> Thank you for posting this question to the SignWriting List, Madson...
>
> The quotation marks are used sometimes. It depends on the writer, and the
> style of your document. For example, the quotation marks are easier to read
> when writing signs horizontally. They are symbols that were designed for
> horizontal SignWriting and were used years ago in the SignWriter DOS
> program.
>
> Quoting what another person signs, inside a document, can be written
> without the Quotation Marks…some writers write the actual sign for "quote"
> at the beginning of the quoted phrase, and then place a Pause symbol
> (Comma) at the end of the quoted phrase - If you are writing the way one
> signs a quoted phrase, that would be the most accurate way to write a
> quote. In that case, the Quotation Marks are not necessary.
>
> So to answer your question…yes…the Quotation Marks can be used, but are
> rarely used. That is why I took them out of the International SignWriting
> Alphabet 2010, but, you can construct them if you want to use them, by
> finding some diagonal lines in the ISWA and building them yourself…They are
> still good symbols that can be used.
>
> The Long Pause can also be constructed and can be as long as you want to
> make it. Make the space between the two lines larger or smaller depending
> on the length of the pause. The Long Pause is usually used when writing
> sign language theatre or sign language songs, when pausing can be different
> lengths related to the timing in music.
>
> Meanwhile, the standard Comma or Pause symbol in SignWriting, with a small
> amount of space between the two lines, which is pre-constructed for you, is
> the symbol most people use for writing sentences…
>
> Attached is a screen capture of building a Long Pause in SignPuddle
> Online, using SignMaker …see attached…
>
>
>
>
> Val ;-)
>
> ------------
>
>
>  On Feb 15, 2012, at 1:35 AM, Madson Barreto wrote:
>
>   Hello!
>
> In older textbooks written signs found two symbols that are not in
> SignPuddle:
>
> - quotation marks
> - Long pause
>
> They have not yet used in SignWriting?
>
> Regards.
>
> *Madson Barreto*
>
>
>
> -------
>
>
>
>
>
>    Val ;-)
>
> Valerie Sutton
> SignWriting List moderator
> [log in to unmask]
>
> Post Messages to the SignWriting List:
> [log in to unmask]
>
> SignWriting List Archives & Home Page
> http://www.signwriting.org/forums/swlist
>
> Join, Leave or Change How You Receive SW List Messages
> http://listserv.valenciacollege.edu/cgi-bin/wa?SUBED1=SW-L&A=1
>
>
>
> SignWriting
> Read & Write Sign Languages
> http://www.SignWriting.org/
>
> SignPuddle Online
> Write SignWriting in the Clouds!
> Documents, Dictionaries, SignMail
> http://www.signbank.org/signpuddle
>
> SignWriting Wiki
> Wiki-style Articles in Sign Languages
> http://www.signbank.org/wiki
>
> SignWriting List
> Technical Support: Ask questions...
> http://www.SignWriting.org/forums/swlist<http://www.signwriting.org/forums/swlist>
>
> SignWriting Literature Project
> Writing Literature in Sign Languages
> http://www.SignWriting.org/literature
>
> SignWriting Encyclopedia Projects
> Writing Encyclopedias in Sign Languages
> http://www.SignWriting.org/encyclopedia
>
> SignWriting Sponsors Forum
> Help Educational Non-Profit Organization
> http://www.SignWriting.org/forums/sponsors<http://www.signwriting.org/forums/sponsors>
>
> SignWriting Shop
> Books, DVDs, Lessons, Services
> http://www.SignWriting.org/shop
>
> Deaf Action Committee For SignWriting
> Center For Sutton Movement Writing
> a US educational nonprofit organization
> PO Box 517, La Jolla, CA, 92038, USA
> Tel: 858-456-0098  Skype: valeriesutton
>
> SignWriting on Twitter
> http://twitter.com/signwriting
>
> SignWriting on YouTube
> *http://youtube.com/signwriting*
>
>  SignWriting on Facebook
> *http://facebook.com/SignWriting*
>
>
>
>
>
>


-- 
Claudia S. Bianchini
PhD Student @ Univ. Paris8 + CNRS-UMR7023-SFL
PhD Student @ Univ. Studi di Perugia + CNR-ISTC-SLDS
[log in to unmask]